How to Clean
06
14
Water Dispense Spoud Cleaning Method
1. Turn the water dispense faucet to
the left.
2. Wipe the inside of the faucet wifh
a soft cloth. Do not use detergents,
thinners, benzene, or wax for
cleaning. This may cause
discoloration or peeling off, and
may cause health problems.
3. After cleaning, assemble the
water dispense spout back by
turning it to the right.
ICE BIN CLEANING & EVAPORATOR CLEANING
- You need 100 ml (3.4 oz), 2.0 L (67.6 oz) measuring cup (2 EA), drain
hoses are required to clean the storage tank.
- You may pour the cleaning liquid into the ice maker tank.
Preparing for the cleaning & descaling : (Descaling may be optional if
the filters are changed on time and installed correctly. A visual
inspection for calcium, TDS and water pressure test should be used when
considering descaling. Please contact technical support for more
information)
1. Prepare (dispense from the unit) in advance 4 Liters (135 oz) of
clean water which will later be used for washing & rising the unit.
(Once removing the FRONT COVER, the unit will no longer able to
dispense the water & ice.)
2. Shutoff the water supply valve after emptying completely the ICE
BIN.
To Next Page
Loading...
