6. Maintenance
6.1 Maintenance
To protect your monitor from damage, store the monitor and
the components in a clean, safe location.
Caution: DO NOT disassemble or attempt to repair this
monitor or other components. This may cause an inaccurate
blood pressure readings and/or EKG recordings.
6.2 Cleaning
Do not use any abrasive or volatile cleaners.
Use a soft dry cloth or a soft cloth moistened with mild
(neutral) detergent to clean your monitor and the arm
cuff and then wipe them with a dry cloth.
When electrodes are dirty, use a soft cloth or cotton
swab moistened with alcohol-based sanitizer to clean the
electrodes.
Do not use gasoline, thinners or similar solvents to clean
your monitor and arm cuff or other components.
6.3 Storage
Keep your monitor and other components in the storage
case when not in use.
Store your monitor and other components in a clean,
safe location.
Do not store your monitor and other components in
locations exposed to extreme temperatures, humidity,
direct sunlight, dust or corrosive vapors such as bleach.
To Next Page
Loading...