8. Electromagnetic Compatibility
The device meets the requirements of EN 60601-1-2.
Warnings and Cautionary Advices
Using accessories other than those specified in this
manual may result in increased electromagnetic emission
or decreased electromagnetic immunity of the
equipment.
The device or its components should not be used
adjacent to or stacked with other equipment.
The device needs special precautions regarding EMC and
needs to be installed and put into service according to
the EMC information provided below.
Other devices may interfere with this device even though
they meet the requirements of CISPR.
When the inputted signal is below the minimum
amplitude provided in technical specifications, erroneous
measurements could result.
Portable and mobile communication equipment may
affect the performance of this device.
Other devices that have RF transmitter or source may
affect this device (e.g. cell phones, PDAs, and PCs with
wireless function).
The Health Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the
device should assure that it is used in such an environment.
The device uses RF energy
only for its internal function.
Therefore, its RF emissions
are very low and are not likely
To Next Page
Loading...
