WELTECH BW-2050 - Operator Settings Configuration; Data Storage and Selection; Printer Configuration Settings; Weighing and Unit Parameters

OPERATORSETTINGS
      
Factory sengs
To set operator sengs hold the SETUPbuon 100x50
down and turn ON, the display will show WELTECH
SETUP when the buon is released DATASTORES
will be displayed, by pressing the INC or DEC arrows
the number of houses or pens data is to be stored
in can be set, 1x5000 to 100x50, when set press ENTER.
SELECTSTOREON
This funcon allows the user to select the house or 
pen in which the bird weights are to be stored. If
turned off the weighings will be stored in numerical
order.

ENABLEBUTTONS  ON
Allows full usage of the front panel

BLUETOOTHRATE 9600BAUD
Not an available opon.

PRINTERRATE 9600BAUD
This is the speed the data is sent to the printer and
can be changed using the INC or DEC buons. Baud
rate for serial port.
BLUETOOTHH/SHK OFF
Not an available opon.
PRINTERH/SHK OFF
This is not used with our printer.
PRINTERLINEFEED ON
Sends line feed to printer after a new line

PRINTERDELAY 0.1SECS
This is the delay time from pressing the print
data button to the actual print function.

WEIGHTRANGE ChickenorTurkey
To be set to the weight capacity of the BW‐2050
10kgs for chickens, 50kgs for Turkeys.

WEIGHTUNITS  KGS
This option allows the operator to select the
measurement of weight to be used kgs, grms, lbs.
BACKLIGHTTIMED
This option allows for the display back light to
be turned off, on or on for a 30 second period.

GRADELAMPS OFF
When the weigher has grading lights fitted
this is ON when using the grading lights.
DIGITCLAMP1
Displays Filter (if weight filter is enabled )
4
5