WELTECH BW-2050 - Advanced Weighing Parameters; Stability and Filtering Adjustments; Weight Freeze and Evenness Settings; Display, Language, and Deviation Settings

STABILITY 10
Repeons within stability jump limit.
Do not alter.
STABILITYJUMP 5
Variaon in ADC count considered stable   
do not alter.
WEIGHTFILTER3
Filters out movement on the weigher

FILTERJUMP0
Filters out excessive sharp movements  
on the weigher

WEIGHTFREEZE ON
Shows accepted weight unl ready

EVENNESS 10%
Percentage above and below average  
for stascs

HIGHLIMIT9.999
Upper acceptance limit

LOWLIMIT0.050
Lower acceptance limit
HIDEDISPLAY OFF
Hides the weight when ready

AUTOZEROFILTER 6
Drives the display towards zero at low weights
Do not alter.

VOLTAGEFILTER6
Baery voltage filter steepness
Do not alter.
DIVISIONS 1
Where a number of birds are being weighed 
together the program can be set to divide
by the number of birds to give an average

DEVIATIONMETHODWELTECH
Universal standards (Weltech)    
Bernard Mahews standard

FASTMODE OFF
Selects the speed the weigher starts up in.

LANGUAGE ENGLISH
Selects the language the weigher starts up in.
(English, Spanish, French or Portuguese)
6
7