GENERAL SAFETY RULES
You know the drill. The purpose of the following safety symbols is to attract your attention to possible dangers.
We don’t want any of our beloved WEN customers accidentally injuring themselves. The safety symbols and the
explanations with them deserve your careful attention and understanding. The safety warnings do not by them-
selves eliminate any danger. These instructions and warnings are not substitutes for proper accident prevention
measures.
Safety Alert Symbol: Indicates danger, warning, or caution. This may be used in conjunction with other symbols.
Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.
NOTE: Advising you of information or instructions is vital to the operation and maintenance of the equipment.
IMPORTANT: Servicing requires extreme care and knowledge and should be performed only by a qualified
service technician.
WARNING: Do not attempt to operate this tool until you have thoroughly read and understood all in-
structions, safety rules, etc…contained in this manual. Failure to comply can result in accidents involv-
ing fire, electric shock, or serious personal injury.
Safe operation of this power tool requires that you read and understand this operator’s manual and all labels af-
fixed to the tool.
Safety is a combination of common sense, staying alert, knowing how your item works, and not doing dumb stuff on
purpose. SAVE THESE SAFETY INSTRUCTIONS.
WARNING: To avoid mistakes and serious injury, do not plug the battery of your tool until the follow-
ing steps have been read and understood.
1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications, limitations, and
possible hazards.
2. AVOID DANGEROUS CONDITIONS. Do not use power tools in wet or damp areas or expose them to rain.
Keep work areas well lit.
3. DO NOT use power tools in the presence of flammable liquids or gases.
4. ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on floor surfaces that are slippery
with sawdust or wax.
5. KEEP BYSTANDERS AT A SAFE DISTANCE from the work area, especially when the tool is operating.
NEVER allow children or pets near the tool.
6. DO NOT FORCE THE TOOL to do a job for which it was not designed.
7. DRESS FOR SAFETY. Do not wear loose clothing, gloves, neckties, or jewelry (rings, watches, etc.) when op-
erating the tool. Inappropriate clothing and items can get caught in moving parts and draw you in. ALWAYS wear
non-slip footwear and tie back long hair.
3
To Next Page
Loading...
Need help?
General
