ASSEMBLY AND ADJUSTMENTS
Accessory Explanation Application
Felt Polishing Wheel Finishing processes for smoothing
a workpiece’s surface.
Cleans, polishes & buffs metal, wood, and plas-
tic. Attached to screw mandrel.
High Speed Cutter Fast, lightweight cuts for carving
and engraving.
Carves, cuts, and slots in wood, plastics and soft
metals such as aluminum, copper, and brass.
Grinding Stone Stone composed of an abrasive
compound and used for various
grinding (abrasive cutting) and
abrasive machining operations.
Grinds, polishes, and deburrs ferrous metals
such as iron.
Sanding Disc Abrasive grain adhered onto the
surface of a cloth.
Material removal and resurfacing. Attached to
small screw mandrel
Dressing Stone A solid block of extremely hard
abrasive.
Breathes new life back into old, worn-out grind-
ing stone bits when used on the dressing stone.
Drum Sander Reduces the tedium of hand sand-
ing, speeds up the sanding process,
and produces more consistent
results.
Fine surfacing or sanding wood.
Cut-Off Wheel Self-sharpening wheels that are
thin in width and often have radial
fibers reinforcing them.
Fast and comfortable cut used ideally in metal
fabrication, maintenance repair, and general
industrial applications. Attached to small screw
mandrel
Sander Band Band that is used with the Drum
Sander and slides over the top of
the bit.
Removes rust from metal; shapes rubber
surfaces, and smooths wood and fiber glass. At-
tached to Drum Sander.
Mandrels A mandrel is a shank with a
threaded or screw head, which are
required when you use polishing
accessories, cutting wheels, sanding
discs, and polishing points.
Allows for more durability when polishing
accessories, cutting wheels, sanding discs, and
polishing points.
Drill Bits Cutting tools used to remove mate-
rial to create holes, almost always
of circular cross-section.
Drill metal, hardwood, and most other materi-
als.
Refer to the chart below for explanations and recommended applications for your rotary bits.
9
To Next Page
Loading...
Need help?
General
