KNOW YOUR MILLING MACHINE
9
PACKING LIST
Drill Chuck &
Taper Shank
(Pre-installed, for holding
drill bits)
Handle x 2
(To be mounted onto
the handwheels)
Spindle Lock Rod
5A Spare Fuse
M10-1.5 T-Nut x 2
(For vise mounting on table)
Double End Wrench x 3
M8/M10 M14/M17 M17/M19
Large Wrench M36
(For loosening the bevel
lock nut)
Hex Wrench x 4
M3M4M5M6
Drill Chuck Key
(For tightening/loosening
the drill chuck)
Oil Bottle
(Comes without oil. Fill with
lubricating oil for dispensing)
Hook Spanner Wrench
D45-52
To Next Page
Loading...
