To Next Page
M
Michael SandersAug 13, 2025
What to do if my Wen 4017 Chainsaw does not turn on?
- DDavid MartinezAug 13, 2025
If your Wen Chainsaw doesn't turn on, there are several potential causes. First, ensure the saw is properly plugged in and that the extension cord is securely connected. If using an extension cord, verify it's the correct size. Make sure you are pushing the safety button before pulling the trigger. Also, check if the kickback brake is engaged and disengage it if necessary. Try a different outlet to rule out a defective outlet. If none of these steps work, it could be a defective motor or switch.
General
