4
15. DO NOT OVERREACH. Keep proper footing and balance at all times. Wear oil-resistant rubber-soled foot-
wear. Keep the floor clear of oil, scrap, and other debris.
16. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order. Follow instruc-
tions for lubricating and changing accessories.
17. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, jamming, breakage, improper
mounting, or any other conditions that may affect the tool’s operation. Any part that is damaged should be properly
repaired or replaced before use.
18. DO NOT operate the tool if you are under the influence of drugs, alcohol, or medication that may affect your
ability to properly use the tool.
19. USE SAFETY GOGGLES AT ALL TIMES that comply with ANSI Z87.1. Normal safety glasses only have
impact resistant lenses and are not designed for safety. Wear a face or dust mask when working in a dusty environ-
ment. Use ear protection such as plugs or muffs during extended periods of operation.
GENERAL SAFETY RULES
1. Keep all parts of the body away from the saw chain when the chain saw is operating. Before you start the chain
saw, make sure the saw chain is not contacting anything.
2. Always hold the chain saw with your right hand on the rear handle and your left hand on the front handle. Hold-
ing the chain saw in the opposite manner can result in an increased risk of serious injury to the user.
3. Only hold the power tool by the insulated gripping surfaces to avoid electric shock in case the saw chain contacts
its own cord or hidden wiring. Saw chains contacting a live wire may make exposed metal parts of the power tool
live and can give the operator an electric shock.
4. Keep the saw chain away from any cords or extension cables.
5. Wear safety glasses and hearing protection. Protective equipment for hands, legs, head and feet is also highly
recommended. Protective clothing greatly reduces the risk of personal injury from loose debris or accidental contact
with the saw chain.
6. Do not operate the chain saw while standing in a tree. Only operate the chain saw from a firm, level surface fixed
on the ground. Always keep proper footing during operation. Slippery or unstable surfaces such as ladders may
cause a loss of balance or control.
7. When cutting a limb that is under tension, be alert for spring back. When tension from wood fibers and branches
is suddenly released, the limb may fly in unpredictable ways, possibly resulting in kickback and injury to the user.
SPECIFIC RULES FOR CHAIN SAWS
WARNING: Do not let comfort or familiarity with product (gained from repeated
use) replace strict adherence to product safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury!
To Next Page
Loading...
Need help?
General
