4214 WENPRODUCTS.COM
1 - 3-prong plug
2 - Properly grounded outlet
3 - Grounding prong
Electrical
information
Grounding instructions
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance
for electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an
equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that
is properly installed and grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet installed by a
licensed electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in electric shock. The conductor
with the green insulation (with or without yellow stripes) is the equipment grounding conductor. If repair or
replacement of the electric cord or plug is necessary, DO NOT connect the equipment grounding conductor to a
live terminal.
CHECK with a licensed electrician or service personnel if you do not completely understand the
grounding instructions, or if you are not sure if the tool is properly grounded.
USE ONLY THREE-WIRE EXTENSION CORDS that have
3-pronged plugs and outlets that accept the tool's plug as
shown in Fig. A. Repair or replace a damaged or worn cord
immediately.
Fig. A
1
3
2
1. 3-pronged plug 2. Properly grounded outlet
3. Grounding prong
CAUTION: In all cases, make certain the outlet in question is properly grounded. If you are not sure if it is,
have a licensed electrician check the outlet.
To Next Page
Loading...
Need help?
General
