GENERATOR SAFETY RULES
GENERATOR OPERATION
1. Only use generator for its intended purposes.
2. Do not touch bare wires or receptacles (outlets).
3. Do not touch hot surfaces. See warning labels on the generator identifying hot parts of the machine.
4. Allow generator to run for several minutes before connecting electrical devices.
5. Do not exceed the wattage capacity of the generator by plugging in more electrical devices than the unit can
handle.
6. Do not turn on electrical devices until after they are connected to the generator.
7. Generators vibrate in normal use. During and after the use of the generator, inspect both the generator as well as
extension and power supply cords for damage resulting from vibration.
8. Have damaged items repaired or replaced as necessary. Do not use plugs or cords that show signs of damage
such as broken or cracked insulation.
9. Allow generator to cool down after use before touching engine or areas of the generator that become hot during
use.
10. Turn OFF all connected electrical devices before stopping the generator.
11. Shut off and disconnect any malfunctioning devices from generator.
12. Always turn generator OFF before refueling. Allow generator to cool for at least 2 minutes before removing fuel
cap. Loosen cap slowly to relieve pressure in tank.
13. Turn the engine switch to “OFF” position when the engine is not running.
14. Empty fuel tank before storing or transporting the generator.
CAUTION: Misuse of this generator can damage it or shorten its lifespan.
TO MAXIMIZE THE LIFESPAN OF THIS GENERATOR, MAKE SURE TO RUN IT
AT LEAST ONCE A MONTH. IF YOU DO NOT RUN IT OFTEN, IT WILL GREATLY
SHORTEN THE LIFESPAN AND PERFORMANCE OF THE GENERATOR.
7
To Next Page
Loading...
Need help?
General
