EasyManua.ls Logo

Wen 56202i

Wen 56202i
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you
use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
(M-F 8AM-5PM CST)
For replacement parts visit
WENPRODUCTS.COM
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
2000W INVERTER
GENERATOR
Model # 56202i
bit.ly/wenvideo
Question and Answer IconNeed help?

Do you have a question about the Wen 56202i and is the answer not in the manual?

Wen 56202i Specifications

General IconGeneral
BrandWen
Model56202i
CategoryInverter
LanguageEnglish

Summary

Introduction and Safety Information

Critical Safety Hazards

Details carbon monoxide, flammable vapors, electrical connection, and hot surface hazards.

Generator Safety Rules

Generator Overview and Preparation

Generator Preparation Steps

Step-by-step instructions for preparing the generator for initial use, including oil and fuel.

Starting and Operating the Generator

Starting the Generator

Essential safety warnings and procedures for starting the generator engine.

Using the Generator Safely

Connecting Electrical Devices

Steps for safely connecting electrical devices to the generator, including overload prevention.

Generator Maintenance

Maintenance Schedule and Cleaning

Recommended maintenance tasks, schedule, important reminders, and cleaning procedures.

Engine Oil Maintenance

Detailed procedures for checking, adding, and changing the engine oil.

Spark Plug Maintenance

Instructions for inspecting, cleaning, gapping, and replacing the spark plug.

Air Filter and Carburetor Maintenance

Procedures for cleaning the air filter and draining the carburetor.

Technical Information

Troubleshooting and Parts

Warranty Statement

Related product manuals