10
Loading the fasteners
Caution: Always disconnect the tool from the air supply before
loading the fasteners.
1. Depress the lock to release the movable magazine and pull the
magazine out fully.
2. Place a full clip of the specified type and size fasteners on the
fixed magazine, up to 100 fasteners may be loaded in the
magazine.
3. Push the movable magazine forward until it was locked.
Actuating tool
Warning: To reduce the risk of injury, Always wear proper eye and hearing protection when
operating this tool.
Warning: A nail will fire each time the trigger is depressed as long as the contact trip remains
depressed which could result in inadvertent actuation.
1. Depress the contact trip firmly against the work surface.
2. Depress the trigger.
To Next Page
Loading...
Need help?
General
