11
Fig. I
WARNING: To avoid injury from accidental startups, always ensure that the tool is switched OFF and
unplugged from the power supply before making any adjustments to the planer.
Rabbeting
Depth
OPERATION
11
MAKING A RABBETING CUT
The planer can create rabbeting cuts up to 1/3 of an inch, limit-
ed by the protruding housing on the right-hand side of the tool .
1. Make sure that the workpiece is secured to a stable platform.
2. Follow instructions in “Operating your Planer” on page 10 to
perform your cut.
3. Make multiple progressive cuts to achieve the desired total
cutting depth (Fig. I).
To Next Page
Loading...
Need help?
General
