Wen 6552

13-INCH
THICKNESS PLANER
Instruction Manual
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM1-800-232-1195 (M-F 8AM-5PM CST)
For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM

Wen 6552 Specifications

General

Model	6552
Type	Planer
Motor Power	15 Amp
Amperage	15 A
Feed Rate	26 ft/min
Number of Blades	2
Knives	2
Motor	15 Amp
Planing Depth	1/8 inch
Maximum Cutting Depth	0.125 in. (1/8 in.)
Maximum Board Thickness	6 in
Weight	72 lb
Dust Port Size	2.5 in
Cord Length	6 feet

Summary

Introduction

Specifications

Details the technical specifications of the thickness planer.

General Safety Rules

Work Area Safety

Guidelines for maintaining a safe work environment and preventing accidents.

Electrical Safety

Crucial safety precautions related to the tool's electrical components.

Personal Safety

Operator safety measures including alertness and protective equipment.

Power Tool Use and Care

Service and California Proposition 65 Warning

Information on servicing, repairs, and California Proposition 65 notice.

Planer Safety Warnings

Specific Planer Safety Precautions

Detailed safety rules specifically for operating the thickness planer.

Electrical Information

Grounding Instructions and Extension Cords

Proper grounding procedures and recommendations for extension cords.

Unpacking and Packing List

Unpacking and Component Check

Steps for safely removing the planer and verifying all parts.

Know Your Planer

Tool Purpose and Parts Identification

Overview of the planer's functions and identification of key parts.

Assembly and Adjustments

Handle, Table, and Dust Chute Assembly

Instructions for attaching the depth handle, preparing tables, and mounting the dust chute.

Mounting the Planer

Procedures for securely mounting the planer to a workbench or stand.

Operation

OnOff Switch, Lock, and Circuit Breaker

How to use the on/off switch, switch lock, and circuit breaker.

Avoiding Blade Damage

Tips to avoid damaging the planer blades during operation.

Height and Depth of Cut

Adjusting Cutterhead Height

How to adjust the cutterhead height for desired cut depth.

Depth of Cut Guidelines

Recommendations for optimal cutting depth for quality finishes.

Workpiece Preparation and Snipe Avoidance

Preparing Workpieces and Checking Blades

How to prepare lumber and identify worn blades.

Techniques for Avoiding Snipe

Methods to prevent uneven cuts at the ends of workpieces.

Grain Direction and Feeding Work

Grain Direction Guidelines

Proper orientation of wood grain for planing.

Feeding Workpieces Through Planer

Step-by-step process for feeding material through the planer.

Maintenance

Changing Planer Blades

Detailed steps for replacing or reversing planer blades.

Planer Care and Lubrication

Brush Inspection and Replacement

Guide for inspecting and replacing motor brushes.

Lubrication and Cleaning Procedures

Information on lubricating parts and keeping the planer clean.

Troubleshooting Guide

Adjusting Extension Tables

How to properly adjust the infeed and outfeed extension tables.

Common Operational Issues and Solutions

Solutions for feeding problems, circuit breaker trips, and unit not running.

Exploded View and Parts List

Exploded View Diagram

Visual representation of all planer components and their assembly.

Comprehensive Parts List

Detailed list of all available replacement parts with numbers.

Warranty Statement

Limited Warranty for Home Use

Terms and conditions of the product's limited warranty for home use.