Wen PL1252

12.5-INCH
THICKNESS PLANER
Instruction Manual
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM1-800-232-1195 (M-F 8AM-5PM CST)
For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM
MODEL PL1252

Wen PL1252 Specifications

General

No Load Speed	34, 000 RPM
Weight	6.5 lbs
Voltage	120 V
Planing Depth	1/8 in. (single pass)
Cord Length	6 ft
Maximum Cutting Depth	1/8 in. (single pass)
Maximum Thickness Capacity	6 in.
Feed Rate	26 feet per minute

Summary

General Safety Rules

Work Area Safety

Guidelines for maintaining a safe and clean work area to prevent accidents.

Electrical Safety

Precautions regarding power tool plugs, cords, grounding, and wet conditions to prevent shock.

Personal Safety

Advice on staying alert, using PPE, and proper attire for safe tool operation.

Power Tool Use and Care

Rules for correct power tool operation, maintenance checks, and storage.

Planer Safety Warnings

Electrical Information

Know Your Planer

Assembly and Adjustments

Attaching the Depth Adjustment Handle

Mounting the Planer to a Work Surface

Operation

OnOff Switch and Lockout

Circuit Breaker

Blade Care and Height Adjustment

Advice on avoiding blade damage and adjusting the cutting depth.

Depth of Cut and Work Preparation

Factors influencing depth of cut and recommendations for preparing lumber.

Blade Condition and Snipe Avoidance

Grain Direction and Feeding Work

Maintenance

Replacing Blades

Troubleshooting Guide

Exploded View and Parts List