To Next PageTo Next Page
Need help?Do you have a question about the Wen PL1326 and is the answer not in the manual?
General| Power | 15 Amp |
|---|---|
| Planing Width | 13 inches |
| Maximum Thickness | 6 inches |
| Minimum Thickness | 1/8 inch |
| Feed Rate | 26 feet per minute |
| Number of Blades | 3 |
| Cutterhead Speed | 10, 000 RPM |
| Type | Benchtop Planer |
| Dust Port Size | 2-1/2 inches |
| No Load Speed | 10, 000 RPM |
| Maximum Cutting Depth | 3/32 inch (2.4 mm) |
| Maximum Depth of Cut | 3/32 inch (2.4 mm) |
Ensures a clean, well-lit area and keeps children and bystanders away.
Guidelines for proper grounding, avoiding wet conditions, and cord safety.
Emphasizes alertness, PPE, preventing unintentional starts, and proper dress.
Instructions on not forcing the tool, using it correctly, and maintaining it.
Guidelines for servicing the tool with qualified personnel and genuine parts.
Details potential chemical exposures from dust and necessary precautions.
Ensures proper grounding for reduced risk of electric shock.
Recommendations for selecting and using extension cords for safe operation.
Describes the planer's function and familiarizes users with its main parts.
Instructions for attaching and understanding the depth adjustment handle.
Steps for preparing tables and adjusting infeed/outfeed extension tables.
Guide on how to attach the dust chute for dust collection.
Steps for securely mounting the planer to a workbench or stand.
Details the power switch, safety lockout key, and circuit breaker functions.
Guidance on preparing wood, avoiding damage, snipe, and understanding grain direction.
Instructions on setting cutting depth, using depth stop, and feeding the workpiece.
Procedures for adjusting, rotating, and replacing cutting inserts for optimal performance.
How to adjust infeed/outfeed tables for reduced snipe and better results.
Details on inspecting brushes, lubricating components, and cleaning the planer.
