Wenglor ODX202 User Manual

ODX202
Fiber Optic Cable Sensor
Operating Instructions
Available as PDF only
Status: 10.10.2016
EN

Wenglor ODX202 Specifications

General

Brand	Wenglor
Model	ODX202
Category	Accessories
Language	English

Summary

Proper Use

Safety Precautions

Product Features

Connection Diagrams

Illustrates electrical connection diagrams for different ODX202 sensor models.

Housing Dimensions

EC Declaration of Conformity

Technical Data

Contamination Warning

Contamination Output

Complementary Products

Control Panel

Mounting Instructions

Mounting to a DIN rail

Step-by-step guide for attaching the sensor to a standard DIN rail.

Side mounting

Connecting the plastic fibre-optic cable

Adjustment

On-Delay and Off-Delay

Explains how to set the ON-Delay and OFF-Delay timing functions.

Selecting Normally Closed or Open Function (NC/NO)

Selecting PNP/NPN/Push-Pull

Setting Switching Distance with the Potentiometer

Setting Switching Distance with the Teach-In Function

Normal Teach-In

Details the procedure for setting the switching distance using the Normal Teach-In mode.

Minimal Teach-In

Dynamic Teach-In (Teach-In with moving objects)

Two-point Teach-In

External Teach-In

Selecting the Run function

Normal operating mode

Describes the normal operational mode, LED indicators, and disabled buttons.

Selecting the Light pulse frequency

Energy saving mode

Test Mode

Maintenance Instructions

Proper Disposal