What to do if Wenglor U1RT002 shows an error due to a short circuit?
If your Wenglor Accessories sensor is showing an error due to a short circuit, you should inspect the electrical wiring and fix the short circuit.
What to do if Wenglor U1RT002 Accessories shows an error because the object is too far?
If your Wenglor Accessories sensor indicates an error because the object is too far away, you should decrease the distance between the sensor and the object.
What to do if Wenglor U1RT002 shows an error due to over-temperature?
If your Wenglor Accessories sensor is overheating and displaying an error, disconnect it from the power supply and allow it to cool down.
What to do if Wenglor U1RT002 shows an error because the object is too close?
If your Wenglor Accessories sensor is showing an error because the object is too close, increase the distance between the sensor and the object.
What to do if Wenglor U1RT002 has a device error?
If your Wenglor Accessories sensor has a device error, try disconnecting it from the power supply and restarting it. If the problem persists, consider replacing the sensor.
What to do if Wenglor U1RT002 shows an error due to no signal?
If your Wenglor Accessories sensor is showing an error due to no signal, you should: * Adjust the distance between the sensor and the object. * Minimize environmental factors like air circulation or ultrasonic sources. * Check the installation.
What to do if Wenglor U1RT002 shows a warning due to undervoltage?
If your Wenglor Accessories is showing a warning due to undervoltage, increase the voltage supply to at least 18 V DC.
Details on the scope and usage of the operating instructions.
Explanation of safety symbols and signal words used in the document.
Information on wenglor's liability exclusions.
Legal notice regarding copyright protection of the manual.
Defines the intended application and industries for the ultrasonic sensor.
Details on unsuitable applications and necessary precautions.
Specifies the required qualifications for operating personnel.
Prohibits product modification and its consequences.
General safety measures to protect the product and user.
Lists product approvals and protection class ratings.
Overview of general technical specifications including range and frequency.
Describes the sensor's warm-up period and its effect on performance.
Presents technical data influenced by filter settings.
Illustrates sonic cone behavior for different objects and settings.
Provides detailed dimensional drawings of the sensor housing.
Lists recommended accessories and connection equipment.
Diagram identifying key components and physical features of the sensor.
Details the sensor's control panel elements and their functions.
Lists the items included in the product package.
Instructions for handling the product during shipping and transit.
Guidelines for proper storage conditions to prevent damage.
Steps and considerations for physically installing the sensor.
Diagram and instructions for wiring the sensor correctly.
Information on sensor status indicators and basic troubleshooting steps.
Procedure for configuring sensor switching points via teach-in.
Overview of parameters configurable via the IO-Link interface.
Configuration of sensor input and output pin functions.
Methods for setting the two switching points (SSC1 and SSC2).
Setup for status messages and warning/error outputs.
Details on data read/written cyclically via IO-Link process data.
List of diagnostic events supported by the sensor.
Record of revisions and changes made to the operating instructions.
Official declaration of compliance with EU directives.
General| Shape | Round |
|---|---|
| Diameter | 30 mm |
| Protection class | IP67 |
| Housing material | Plastic |
| Ambient temperature | -25...70 °C |
To Next Page
