New Features V 2.91 WERSI OAX System MUSIC STORE
Page 9 from 10
2.3 Solo function for selectors
If you use many sounds at the same time on a manual, you can switch a desired sound to SOLO on the "Profi
Manual Controller" page.
With the SOLO function you can specifically filter out one sound and make your settings such as reverb,
octave position or the tone controls in peace.
Example:
This screenshot shows a combination of five sounds for the upper manual and the sound “Chiff” is selected.
As soon as you have opened the "Profi Manual Controller" page by double-clicking on this selector, you will
see the SOLO function next to the "Back" display button.
When the function is switched on, you only hear the sound "Chiff". The other four sounds are muted.
As soon as you are back on the professional display, you will hear all the sounds again.
The SOLO function is not stored in the total preset, but remains activated until you deactivate the function
yourself or turn off the instrument.
To Next Page
Loading...
Need help?
General
