WERTHEIM Elegance Robot - Routine Maintenance; Emptying the Dry Dust Bin; Cleaning and Replacing Filters

16
MAINTENANCE
IMPORTANT! Ensure that the cleaner is switched off before preforming any
maintenance.
Emptying the Dry Dust Bin
1. Press the Dust Bin Release Button to remove
the dust bin.
2. To empty the dust bin, press the Dust Bin Lid
Release Button, then open the dust bin lid, as
shown.
2. Remove the dust bin from the water tank.
3. Open the dust bin lid and empty the contents
into a rubbish bin.
Emptying the Water Tank Dust Bin
1. Press the Dust Bin Release Button to remove
the 2-in-1 Water Tank and Dust Bin.
Cleaning & Replacing the Filters
1. Open the dust bin lter cover.
2. Remove the lters and clean using the cleaning
brush provided. Alternatively, replace the lters if
required.
NOTE: it is recommended to replace lters every 6 months.