Why WERTHEIM Vacuum Cleaner has insufficient application time after charging?
Insufficient application time after charging your WERTHEIM Vacuum Cleaner can occur due to: - Insufficient charging time. Make sure to fully charge the battery according to the instructions. - Normal discharge reduction in the battery. If this is the case, consider purchasing a new battery.
What to do if the charging indicator light doesn't turn on when charging my WERTHEIM Evolution MAX?
If the charging indicator light on your WERTHEIM Vacuum Cleaner fails to turn on during charging, consider the following: - Ensure the cleaner is properly connected to the charger adapter. - Verify that you are using the correct charger. The charger model number should be ZD12D260050AU.
Why does my WERTHEIM Vacuum Cleaner have reduced suction?
Reduced suction in your WERTHEIM Vacuum Cleaner can be caused by several factors: - The dust canister might be full. If so, empty the dust canister. - The cyclone separator could be blocked. Try cleaning or replacing it. - There might be a blockage in the airway. Clear the airway to restore suction.
How to fix a WERTHEIM Evolution MAX Vacuum Cleaner that doesn't start?
If your WERTHEIM Vacuum Cleaner isn’t starting, the most likely cause is a flat battery. To resolve this, charge the vacuum cleaner.
What to do if the roller brush jammed indicator is on during operation of my WERTHEIM Evolution MAX Vacuum Cleaner?
If the roller brush jammed indicator is on during operation of your WERTHEIM Vacuum Cleaner, it means that the roller brush is jammed. Turn off the cleaner and remove the battery, then follow the maintenance procedures in this manual to clean the roller brush.
General| Brand | WERTHEIM |
|---|---|
| Model | Evolution MAX |
| Category | Vacuum Cleaner |
| Language | English |
Crucial information regarding the charger, intended use, and essential pre-operation checks.
Key safety warnings such as avoiding heat, keeping hands dry, and proper plug handling.
Detailed safety points covering operation, electrical safety, and accessory handling.
Steps for fitting and detaching the battery from the cleaner and accessories.
Explanation of the LED indicators for battery charging status.
How to use the on/off button, auto mode, and suction control buttons for effective cleaning.
Steps to charge the vacuum cleaner and the second battery using the dedicated charging dock.
Instructions for charging the vacuum cleaner directly through its power port.
Details on how to use the hard floor, combination, and mini motorised brush attachments.
Step-by-step guide on how to safely empty the dust bin of the vacuum cleaner.
Instructions for removing and replacing the cyclone separator component for optimal performance.
Guide on how to clean and replace the HEPA cyclone filter unit as part of regular maintenance.
Instructions for removing and replacing the HEPA 13 exhaust filter to maintain air quality.
Steps to clean the brush roller in the hard floor power head, addressing debris buildup.
Instructions for cleaning the brush roller in the combination power head, removing tangled debris.
Guide on cleaning the roller brush within the mini turbo brush attachment, removing hair and debris.
Addresses common problems like failure to start, reduced suction, and charging issues with their causes and fixes.
Details on the two-year parts and labour warranty, coverage, and limitations for domestic use.
To Next Page
