20
Cleaning mini turbo brush.
1. Disconnect the mini turbo brush from the
cleaner.
2. To release the roller brush from the mini turbo
brush, use a at head screwdriver or coin (not
supplied) and turn the coin to unlock the cover.
3. Lift the small cover to access the roller brush.
4. Lift the roller brush from the motorised brush.
5. If a build-up of debris is wound around the roller
brush, remove by carefully cutting with scissors.
Avoid damaging or cutting the bristles.
6. To replace, reverse steps 2 - 4. Ensure the roller
brush clicks into position when placed back
into the mini turbo brush.
To Next Page
Loading...
