WERTHEIM Evolution MAX - Filter Cleaning and Replacement; Cleaning the HEPA Cyclone Filter; Replacing the HEPA 13 Exhaust Filter

18
Cleaning the HEPA cyclone lter
1. Pull the lter unit from the cleaner.
2. Following the arrow, twist the cyclone lter and
remove it.
3. Place the lter unit back into the cleaner, lining
up the clips on each side with the grooves
inside the cleaner.
It is recommended to replace the lters every 6
months or when the lters are soiled with dirt.
Cleaning the HEPA 13 exhaust lter
1. Twist the lter cap anti-clockwise to remove it
from the cleaner.
2. Following the arrow, twist the exhaust lter and
gently pull it out of the lter cap.
3. Replace with a new one and place the lter
cap back onto the cleaner, twisting clock wise
until it clicks into place.
It is recommended to replace the lters every 6
months or when the lters are soiled with dirt.