11
Evolution
1. Insert the powerhead into the rod
(D). You will hear an audible “click”
sound when it is securely in place.
2. Insert the opposite end of the rod
into the air inlet of the cleaner (E).
You will hear an audible “click” sound
when it is securely in place.
1. Insert the battery into the cleaner
until it clicks into place (F).
2. To remove the battery, press the
Battery Release button and gently
remove.
D E
IMPORTANT! ALWAYS REMOVE THE BATTERY FROM THE APPLIANCE
BEFORE FITTING OR REMOVING ACCESSORIES.
INSTALLING AND REMOVING THE BATTERY
HANDSTICK
“PUSH”
F
To Next Page
Loading...
