10
1. Insert the charging stand rod into
the charger base. Ensure that the
rod is inserted securely into the
charger base (A).
2. Insert the charging dock (B) onto the
top of the charging stand rod. Push
gently to ensure the dock is secure.
The charging stand should now
resemble the image (C).
ASSEMBLY
IMPORTANT: ALWAYS REMOVE THE POWER PLUG FROM THE POWER SUPPLY
BEFORE ASSEMBLY.
CB
A
NOTE: THE ACCESSORIES
SUPPLIED CAN BE STORED
ONTO THE CHARGER
BASE, AS SHOWN.
CHARGING STAND
To Next Page
Loading...
