18
1. Use the metal handle, as shown, to
remove the cyclone separator from
the cleaner.
CLEANING THE CYCLONE SEPARATOR
“LIFT”
CLEANING OR REPLACING THE
AGITATOR BAR
NOTE: THE CYCLONE SEPARATOR CAN BE WASHED USING LUKEWARM WATER. THE
CYCLONE SEPARATOR NEEDS TO FULLY AIR DRY BEFORE REINSTALLING.
1. Disconnect the powerhead from
the rod.
2. To release the agitator bar from
the powerhead, use a at head
screwdriver (not supplied) and turn to
unlock the cover.
3. Lift the small cover to access the
agitator bar.
To Next Page
Loading...
