Wesco WS8910 User Manual

23
EN
5. Indirect measurement with
Pythagorean theorem
The device presets three models to
measure the unilateral distance of the
triangle with Pythagorean theorem, to
provide the convenience for the indirect
measurement by the user under the
certain circumstances, press the button
to select the indirect measurement model
with Pythagorean theorem.
1) to measure the hypotenuse a
and cathetus b, then get the value of
another cathetus h through indirect
calculation.
To press the button, the screen will
show , and the hypotenuse a will
flash, after the measuring point is locked,
to press the button to measure
the hypotenuse of the triangle, then the
cathetus will flash, after the measuring
point is locked, to press the button
to measure the cathetus of the triangle.
Later on the device will calculate the
value of another cathetus h and show the
calculated result in the main displaying
area. The measured results of a and b will
be shown in the supplementary displaying
area.
To press the button, clear off last
measured result, and arrange the new
measurement.
2) , to measure the hypotenuse
a,c and the cathetus b, then to get the
value of another edge h with indirect
calculation.
To press the button twice, the screen
will show , the hypotenuse a will
flash, after the measuring point is locked,
to press the button to measure
the hypotenuse a, then the cathetus
will flash, after the measuring point
is locked, to press the button to
measure the cathetus b of the triangle,
then the hypotenuse c will flash, after the
measuring point is locked, to press the
button to measure the hypotenuse
c of the triangle, later on the device will
calculate the value of another edge h
automatically, and show the calculated
result in the main displaying area. The
measured results of a and b and c will be
shown in the supplementary displaying
area.
To press the button, clear off the last
measured result, and arrange the new
measurement.
3) , to measure the hypotenuse a,
b and cathetus c, then get the value of h
with indirect calculation.
To press the button three times,
the screen will show , and the
hypotenuse will flash, after the measuring
point is locked, to press button to
measure the hypotenuse a of the triangle,

Wesco WS8910 Specifications

General

Brand	Wesco
Model	WS8910
Category	Measuring Instruments
Language	English