To Next PageTo Next PageWhat to do if my Weslo CADENCE DX12 Treadmill turns off during use?
If your Weslo Treadmill's power turns off during use, first, check the circuit breaker located on the treadmill frame near the power cord. If tripped, wait five minutes, then press the switch back in. Also, ensure the power cord is properly plugged in. Remove and reinsert the key fully into the console. If it still doesn't run, call Customer Service.
How to fix Weslo CADENCE DX12 when the power does not turn on?
If the power of your Weslo Treadmill does not turn on, ensure the power cord is plugged into a surge suppressor, and the surge suppressor into a grounded outlet. Use a UL 1449 listed TVSS surge suppressor with specific voltage and joule ratings. Also, ensure the key is fully inserted into the console. Finally, check the circuit breaker on the treadmill; if tripped, wait five minutes before resetting it.
General| Motor Power | 2.25 HP |
|---|---|
| Maximum User Weight | 250 lbs |
| Speed | 0-10 MPH |
| Display | LCD |
| Foldable | Yes |
| Running Area | 16 x 50 inches |
| Programs | 6 |
Essential safety instructions covering proper placement, usage, and user limitations.
Warnings on electrical, clothing, speed, supervision, and general operational safety.
Detailed steps and diagrams for assembling the treadmill, requiring two people.
Troubleshooting steps for power, display, and walking belt problems.
