To Next PageTo Next Page
Need help?Do you have a question about the Weslo Cadence 4.6 Ds and is the answer not in the manual?
General| Motor Power | 2.25 HP |
|---|---|
| Maximum Speed | 10 mph |
| Running Area | 16" x 50" |
| Display | LCD |
| Foldable | Yes |
| Weight Capacity | 250 lbs |
| Incline Levels | 2 |
| Incline | Manual, 2 positions |
| Programs | 6 |
Provides contact details and operating hours for customer service assistance.
A warning to read all precautions and instructions before using the equipment.
Detailed safety rules and operational advice for treadmill use.
Identifies and illustrates key parts of the treadmill and console.
Detailed instructions for assembling the treadmill, requiring two people.
Information on the special lubricant coating the walking belt and its care.
Guidance on connecting the power cord, surge suppressor, and proper grounding.
Explains the console layout, displays, buttons, and sensors.
Instructions for installing batteries into the console for backup power.
Initial steps to prepare the console and begin operation.
Guidance on incorporating hand weights into workouts for enhanced intensity.
Instructions on how to safely fold the treadmill for storage.
Steps for safely moving the folded treadmill using its front wheels.
Instructions on how to safely unfold the treadmill from storage.
Solutions for problems related to power, circuit breakers, and console displays.
Troubleshooting steps for a slow, slipping, or off-center walking belt.
Guidance on determining target heart rates for fat burning and aerobic exercise.
Recommended phases for a complete workout: warm-up, training zone, and cool-down.
Recommendations for workout frequency to maintain or improve fitness levels.
Descriptions and illustrations of common stretches for flexibility.
A detailed list of all parts with key numbers and descriptions.
A visual representation of parts and their assembly sequence.
Instructions on how to order replacement parts via customer service.
Details of the 90-day limited warranty covering defects in workmanship and material.
