Weslo Inversion Flex WLBE0109.0 - Operation and Inversion Programs; Storing the Inversion Table

14
16
8
7
5
6
STORING THE INVERSION TABLE
To store the inversion table, adjust the Adjustment
Leg (3) to the shortest length (see ADJUSTING
THE ADJUSTMENT LEG on page 12).
Next, adjust the Ankle Lock (16) to the position
c
losest to the Adjustment Leg (3) (see USING THE
ANKLE LOCK on page 13).
Then, lift on the Long and Short Linking Bars (7, 8)
and fold the Front and Rear Frames (5, 6) together.
3
WARNING: Always make sure
that the Linking Bars (7, 8) are straight
across before you use the inversion table.