Weslo Inversion Flex WLBE0109.0 - Page 7

7
2
. Slide a Pivot Bar (23) into the bracket on one
side of the Backrest Frame (1). Make sure that
the adjustment holes are in the indicated
location.
Engage the pin on the Backrest Frame (1) into
the center adjustment hole.
Repeat this step with the other Pivot Bar
(23).
2
Pin
23
23
1
Adjustment
Holes
3. Set the Pulleys (29) inside the slots in the
Saddle Plates (20) as shown.
3
20
29
29
20