To Next PageTo Next Page
Need help?Do you have a question about the Weslo WETL91072 Cadence 910 and is the answer not in the manual?
General| Motor Power | 2.25 HP |
|---|---|
| Maximum Speed | 10 MPH |
| User Weight Capacity | 250 lbs |
| Foldable | Yes |
| Speed Range | 0-10 MPH |
| Incline Range | 0-10% |
| Display | LCD |
| Programs | 6 |
Stretch hamstring, back of knees and back. Hold for 15 counts.
Stretch hamstrings, lower back and groin. Hold for 15 counts.
Stretch calves, achilles tendons and ankles. Hold for 15 counts.
Stretch quadriceps and hip muscles. Hold for 15 counts.
Stretch quadriceps and hip muscles. Hold for 15 counts.
Proper intensity level found by using your heart rate as a guide.
Measure heart rate by counting beats for six seconds.
Includes warming up, training zone exercise, and cool down.
Troubleshooting steps for when the treadmill power does not turn on.
Troubleshooting steps for when the treadmill power turns off during use.
Troubleshooting steps for console display malfunctions.
Gather required tools and prepare parts before assembly.
Securely attach the base legs to the upright using bolts, washers, and nuts.
Slide open the storage latch to prepare for lowering the treadmill.
Hold firmly and bend legs to lower the treadmill safely to the floor.
Steps to safely fold the treadmill for storage, including unplugging.
Information on PERFORMANT LUBE and avoiding other substances on the walking belt.
Instructions for properly plugging the treadmill's power cord into an earthed outlet.
Insert the key fully into the power switch to enable the console display.
Reset speed control and turn clockwise to start the walking belt.
Step onto foot rails and turn speed control to RESET to stop the belt.
Power turns off automatically after six minutes of inactivity.
Adjust a switch on the console to select kilometers or miles for display.
