1. DO NOT OPERATE, ADJUST, OR REPAIR THIS EQUIPMENT WITHOUT PROPER TRAINING.
2. ADHERE TO ALL SAFETY WARNINGS.
3. DO NOT REMOVE GUARD DOORS.
4. A STIFF ARM BACK-UP IS STRONGLY RECOMMENDED, BUT IF A FLEXIBLE LINE (CHAIN
OR CABLE) MUST BE USED, THE LINE MUST BE HORIZONTAL AND AT RIGHT ANGLES
TO THE LONGITUDINAL AXIS WITH NO SLACK IN THIS LINE.
5. SHUT OFF ALL POWER AND DISCONNECT HYDRAULIC HOSES BEFORE CHANGING
TONG DIES/JAWS, MAKING ADJUSTMENTS, REPAIRS, OR LUBRICATING THIS
EQUIPMENT.
6. KEEP ALL PARTS OF THE BODY AND CLOTHING AWAY FROM MOVING PARTS.
7. FAILURE TO COMPLY WITH THIS WARNING COULD RESULT IN PERSONAL INJURY
AND EQUIPMENT DAMAGE.
WARNING
DO NOT OPERATE WHEN FRONT GUARD DOOR IS OPEN OR MISSING. KEEP HANDS CLEAR OF
ROTATING PARTS. FAILURE TO COMPLY WITH THIS MAY CAUSE SERIOUS BODILY HARM.
WARNING
SNUB LINE MUST BE SECURELY ATTACHED TO REAR OF TONG AND TO ANCHOR POINT. ALL
SLACK MUST BE OUT OF SNUB LINE BEFORE TONG IS OPERATED. FAILURE TO COMPLY WITH
THIS WARNING MAY CAUSE SERIOUS BODILY HARM.
To Next Page
Loading...