Westerbeke 30 - Page 115

5.44
1.5 Shaft bearings
Both
the input and the output shafts are carried in amply dimensioned taper roller
bearings.
The intermediate gear and
the movable gears are carried in sturdy needle roller
bearings.
1.6
Shaft seals
External sealing
of the input and output shafts is provided by radial sealing rings.
The running surfaces on the shafts are casehardened.
1.7
lubrication
The transmissions are immersion-lubricated. The bearings are generously supplied
with splash oil and oil mist.