Western Digital My Net AC1300 User Manual

PRODUCT OVERVIEW
7
MY NET AC1300 ROUTER
USER MANUAL
Back Panel
Power port
Ethernet ports
Internet port USB 2.0 ports
Activity LED
(Yellow)
Link LED
(Green)
Reset button
Power button
Components
Port LEDS
Component How to use
(4) Ethernet (LAN) ports Use Ethernet (network) cables to connect wired network devices
to these ports.
Internet (WAN) port Use an Ethernet (network) cable to connect this port to a modem.
(2) USB 2.0 port(s) Connect storage devices such as the WD Passport or a printer to
your network so you can share files and resources.
Reset button To reset your My Net router to factory defaults, press and hold the
Reset button until the power LED begins blinking (about ten
seconds).
Power port Use the AC power adapter included in the box to connect the
power source to this port.
Power button Press to turn on the router. Press again to turn off the router.
Component LED Description
Ethernet ports Link LED (Green) Steady on when a cable connects the
port to a network device’s Ethernet port.
Activity LED (Yellow) Blinks to indicate network activity on
that Ethernet port.
Internet port Link LED (Green) On when a cable connects the port to
the modem.
Activity LED (Yellow) Blinks to indicate network activity on
that port.

Western Digital My Net AC1300 Specifications

Ports & interfaces

gigabit ethernet ports	4
usb ports	2
upnp	enabled

Wireless Specifications

dual-band speed 2.4 ghz	450 Mbps
dual-band speed 5 ghz	1300 Mbps
wireless standard 2.4 ghz	802.11n
wireless standard 5 ghz	802.11ac

Weight and Dimensions

length	1.4 in
depth	6.6 in
width	9.0 in
weight	0.96 lb