Why is there no power at the AC receptacles of my Westinghouse WGen9500DF Portable Generator?
- DDevin CastilloSep 7, 2025
If there's no power at the AC receptacles, it could be due to several reasons. The OUTPUT READY LED might be OFF and the OVERLOAD LED might be ON (check the AC load, stop and restart the engine), AC circuit breaker/s might be tripped (check AC loads and reset the circuit breaker/s), or a faulty power tool or appliance might be connected (replace or repair the tool/appliance, then stop and restart the engine). Also check the air inlet, stop and restart the engine.