How to prevent grilled chops and steaks curling in Westinghouse WVE916SB?
To prevent grilled chops and steaks from curling when using your Westinghouse Cookers, cut into the fat every 2cm (1/2 inch).
Why are the benchtop or knobs overheating on my Westinghouse WVE916SB Cookers?
If the benchtop or knobs on your Westinghouse Cookers are overheating, it could be due to using the wrong cooking pot or pan. Refer to the cooktop section for correct selection. Also, make sure that the pot or pan is located centrally on the burner.
Why is the heat low and cooking slow on my Westinghouse WVE916SB Cookers?
General| Oven Type | Electric |
|---|---|
| Fuel Type | Electric |
| Number of Ovens | 1 |
| Material | Stainless Steel |
| Control Type | Knob |
| Keep Warm Function | Yes |
| Delay Timer | Yes |
| Non-Stick Inner Pot | No |
Solutions for oven/grill not working or insufficient heating.
Fixes for burner flame problems and low heat cooking.
Specifications for kitchen cabinets and gas model clearances.
Steps and cabinetry requirements for freestanding installation.
How to install and adjust the appliance's screw-in feet.
How to level the oven and fit the splashback.
Steps to install anti-tilt brackets for stability.
Warning about using appropriate fasteners for wall mounting.
How to attach the clip-on kick panel.
Final steps for attaching the kick panel to the feet.
Overview of the slot-in installation method.
Securing anti-tilt brackets and installing front stops for slot-in models.
Requirements for building cabinets for built-in ovens.
Guidelines for installing the oven under a benchtop or in a vertical cabinet.
Compliance requirements for wiring connections and hard wiring.
Details on injector sizes, gas pressures, and gas supply connection.
Procedure for converting to LPG and checking the gas supply.
To Next Page