55
Machine control board, Software
704 67 020 00 _ 111
OPERATING INSTRUCTIONSGF Robimat XL / XM
CHECK
←L SEL. M→ :E
M
7
INSTALLING MODE
←L SEL. M→ :E
E
L
E
L
E L
E L
E
L
E L
E L
3xM
INSTALLING MODE
> MACHINE
TUBE COUNT
by COINMECH
ALT. PAYOUT
on
INSTALLING MODE
> COIN MECHANISM
COIN 2 dis.: GE
0.10 12T:000
COIN 3 dis.: GE
0.20 4T:000
COIN 4 dis.: GE
0.50 2T:000
TOKEN 1 VALUE
EUR : 0.00
COIN 1 dis.: GE
0.05 0T:000
E
E
L
COIN 5 dis.: GE
1.00 0C:000
COIN 6 dis.: GE
2.00 0C:000
E L
TOKEN 2 VALUE
EUR : 0.00
TOKEN 3 VALUE
EUR : 0.00
E
L
E
L
E
L
E
L
LIMIT COINS
TUBE 0.05: 0
CHANGE BLOCKED
at 255 coins.
E
L
CORRECT CHANGE
auto
LIMIT COINS
TUBE 0.10: 0
LIMIT COINS
TUBE 0.20: 0
LIMIT COINS
TUBE 0.50: 0
E
L
E
L
E
L
[TUBE COUNT]
[by COINMECH]
(default)
Tube ll level is not counted by the control board, but by the coin mechanism. The tube
level transmitted by the coin mechanism is what should be available for coin return. Please
note that transmitting the tube level from the coin mechanism to the control board can take
up to one minute.
[Control board] The control board counts the tube level.
[ALT. PAYOUT]
[on] The coin mechanism decides how the change is returned. For example, 20 cents can be
returned as 2 x 0.10 € or 1 x 0,20 € or 4 x 0.05 €
[o] The machine control board determines how the change is returned. In this way the number
of coins dispensed is kept to a minimum.
To Next Page
Loading...
