Westpow STR.B Series User Manual

Note:
: It is valid at Voltage Ramp mode.
: It is valid at Current Limit mode.
: It is valid at Jogging mode.
Parameter top ode elect is valid when control mode is keyboard. If
the external control mode is selected, stop mode is determined by wirring.
For detail see figure 5-1
If the parameter SCR trigger select is set 3, displays in the
keyboard, and the product can't monitor the state. There are not protection.
Note:
: It is valid at Voltage Ramp mode.
: It is valid at Current Limit mode.
: It is valid at Jogging mode.
Parameter top ode elect is valid when control mode is keyboard. If
the external control mode is selected, stop mode is determined by wirring.
For detail see figure 5-1
If the parameter SCR trigger select is set 3, displays in the
keyboard, and the product can't monitor the state. There are not protection.
8 Parameter Function Table8 Parameter Function Table
User ManualUser Manual User ManualUser Manual
16
OPERATION
MENU
17
OPERATION
MENU
Starting ModeStarting Mode
Initial VoltageInitial Voltage
5%~75% of Supply Voltage 5%~75% of Supply Voltage
Jog VoltageJog Voltage 5%~75% of Supply Voltage 5%~75% of Supply Voltage
Ramp TimeRamp Time 1~120 S1~120 S
Curr. Limit LevelCurr. Limit Level 20%~400% of rated current20%~400% of rated current
Curr. Limit timeCurr. Limit time
Over Curr. ProtectOver Curr. Protect 400%~600% of rated current400%~600% of rated current
Current Unbalance
Factor
Current Unbalance
Factor
5%~50% of present current5%~50% of present current
Control ModeControl Mode
1: Keyboard
2: External
3: Keyboard and External
1: Keyboard
2: External
3: Keyboard and External
SCR Trigger SelectSCR Trigger Select
¡÷ ¡î
Start Overload LevelStart Overload Level
1-81-8
¡÷ ¡î
Over Curr. at
running protect
Over Curr. at
running protect
20%~400% of rated current20%~400% of rated current
¡÷ ¡î
Stop ode electStop ode elect
1.Free Stop
2.Soft Stop(voltage ramp)
1.Free Stop
2.Soft Stop(voltage ramp)
¡÷ ¡î
Soft Stop Time FactorSoft Stop Time Factor 1 10~ 1 ~ 10
¡÷ ¡î
Rate CurrentRate Current
See chapter9.7 and 10 See chapter9.7 and 10
NameplateNameplate
FaultFault See chapter12See chapter12
Ready StateReady State Can't modifyCan't modify
FunctionFunction
Name Name
Range and meanRange and mean
Default
Value
Default
Value
ValidityValidity
3
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Table 8-1
1.Voltage Ramp
2.Current Limit
3.Jogging
1.Voltage Ramp
2.Current Limit
3.Jogging
1~120 S1~120 S
1.Block trigger
2.not block trigger
3.Block trigger, show b-p
1.Block trigger
2.not block trigger
3.Block trigger, show b-p

Westpow STR.B Series Specifications

General

Brand	Westpow
Model	STR.B Series
Category	Controller
Language	English