4. Scene Mode Voice Command
Scene mode is a batch control feature that allows multiple device operations to be set
and executed as a single command.
*Note: Customize the light zone and brightness settings for reading, movie, and
relaxation modes in 2.3 Device Control -> 2.3.2 Custom Control
Scene mode voice
command
Spec
All lights on/off/100% All light zones turn on to the previous brightness setting/
all light zones off/ all light zones set to 100%
I’m home All lights are on 100%.
Goodbye All lights are off.
Good night All lights off.
I’m awake All lights on 50%. More to be added as hardware and
controls expand.
Shutdown RV Turn off all lights, water pump, and water heater. More to
be added as hardware and controls expand.
Reading mode Bedroom lights 40%. All other light zones 10%.
Movie mode Living room lights 30%. All other light zones are off.
Relaxation mode All lights 30%.
Voice Command-List
All Lights On/ off
Turn all of the lights on/ off Turn on/ off all lights
Switch on/ off all lights Flip on/ off all lights
Flip all lights on/ off Turn on/ off all light zones
Turn on/ off all of the lights Turn all lights on/ off
Switch all lights on/ off Turn on/ off all of my lights
All Lights 100%
Brighten all lights Brighten all light zones
Brighten up all lights Turn all lights up
Turn up all lights Turn up all light zones
Increase all lights Increase all light zones
Light up the RV Full brightness
Reading Mode
I'm going to read I'd like to read
Time to read Reading mood lighting
Reading mood It's time to read
I want to read Adjust to reading mode
Change lights to reading mode It's reading time
To Next Page
Loading...