2. Device Control
Users can control the RV devices by pressing the buttons on the Control Panel.
a. Light Controls:
The illustration shows light 3 is ON, other
three lights are OFF.
Press & Release: Toggles ON / OFF.
When the output is turned off, the indicator LED is blue. To turn on the output,
press the button, and the panel indicator LED will become white. To turn off the
output when it's on, press the button again.
Press & Hold: Changes Dimming Level
When pressed and held, lights will incrementally decrease down to 10%
brightness.
When pressed and held again, lights will incrementally increase up to 100%
brightness.
b. Water Pump Control:
Switch illumination, as shown, will indicate water pump is ON.
Press & Release: Toggles ON / OFF.
When the output is off, the indicator LED is blue. To turn on the output, the user
should press the button. When the output is turned on, the indicator LED changes
to white. To turn off the output, the user should press the button again.
To Next Page
Loading...