7
POWER ON / OFF / REMOTE (MAIN) SWITCH
• Please make sure the inverter turns off before installation.
• The input comes from AC Grid can’t be controlled by switch. Please disconnect the AC Grid
when you operate the main inverter unit in order to avoid the electric shock.
AC Output (Please refer to hard wiring installation)
AC output socket (please refer to 4-2)
AC INPUT CIRCUIT BREAKER - The AC input circuit breaker protects the model from overload.
When an overload condition exists, the circuit breaker stops supplying output AC grid power.
The breaker will recover automatically.
CHASSIS GROUND: CONNECT THE WIRE # 8 AWG TO VEHICLE CHASSIS
Operating the inverter without a proper ground connection may cause electrical safety hazard.
INTRODUCTIONS
To Next Page
Loading...
