Need help?Do you have a question about the Wfly WFT06II and is the answer not in the manual?
General| Type | Transmitter |
|---|---|
| Channels | 6 |
| Frequency | 2.4GHz |
| RF Power | ≤ 20dBm |
| Modulation Type | GFSK |
| Bandwidth | 500KHz |
| Operating Current | ≤ 120mA |
| Compatibility | Aircraft, Helicopter, Glider |
| Modulation | PPM |
| Range | 800-1000 meters |
| Model Type | Aircraft, Helicopter |
| Frequency Range | 2.400GHz-2.483GHz |
| Dimensions | 190 x 80 x 240 mm |
Details specifications and capabilities of the WFT0611 transmitter.
Details specifications and capabilities of the WFR06S receiver.
Details how to reset the transmitter to its original factory settings.
Explains how to select and save different model configurations.
Guides on selecting between helicopter and airplane model types.
Explains how to select the appropriate battery type for the transmitter.
Details the process of coding the transmitter with a receiver.
Explains how to set up the fail-safe function for safety.
Defines a 5-point curve for throttle control in idle flight.
Adjusts swash plate settings for Aileron, Elevator, and Pitch.
Adjusts the sensitivity of the gyro for different flight modes.
Defines a 5-point curve for pitch control in normal flight.
Defines a 5-point curve for pitch control in idle flight.
Defines a 5-point curve for pitch control when throttle hold is active.
Defines a 5-point curve for throttle control in normal flight.
Links flap and aileron control for combined movement.
Creates differential movement for ailerons using two servos.
To Next Page
