16 VTAL (v tail mix control)
17-SYS【system setting】
18-BAT【Battery mode】
19-TRSI【Training / simulator】
20-STK【Stick setting (left right hand)】
21-CAIL【Stick calibration】
22-COD【Coding】
23-F'S【Fail safe】
●Function description
This function is to combine the function of elevator and rudder when using v tail airplane. The travel of
elevator and rudder can be adjusted independently.
ELE1 elevator 1 ELE2 elevator 2 RUD1 rudder1 RUD2 rudder 2
●Setting method:
1, select VTAL16 under setting mode
2, press +/- button to switch between ON/OFF, press UP/DOWN to choose the position, press +/- to change
value.
3, Press and hold Menu to exit or press menu to switch to next item
●please refer to page 11. NOTE: Item order could be different
●please refer to page 11.
●please refer to page 12
●please refer to page 12
●please refer to page 12
●please refer to page 13
●please refer to page 13
29
Airplane
To Next Page
Loading...
