Name: Whale GP0418
Brand: Whale
Rating: 5 (1 reviews)

To Next Page

Flipper Pump

GP0418

Thank you for purchasing this Whale® product. For over 70 years, Whale has led the way in the

design and manufacture of freshwater and waste systems including: pumps, plumbing faucets,

showers for low voltage applications. The company and its products have built a reputation for quality,

reliability and innovation backed up by excellent customer service.

For more information please visit www.whalepumps.com

Read the points listed below before installation and use of equipment.

Ensure all relevant personnel read the points listed below and that a copy is passed on to the end user.

This product is designed for use as a domestic freshwater and saltwater hand pump in caravans and boats. The pump may also be

used in conjunction with an inline pump, or as a back up to a submersible pump.

1. This product is designed for use with fresh or salt water. If it is intended for use with any other liquid, it is the

user’s responsibility to ensure that the materials are fully compatible with the liquids to be used and that a

system of safe working practice is applied to installation, use and maintenance.

2. The manufacturer cannot be held responsible for claims arising from incorrect installation, unauthorised

modification or misuse of the product.

NOTE: Incorrect installation will invalidate warranty. Choose a

position where the pump can be operated comfortably.

NOTE: The maximum reach of the spout is 113mm (4¼”), and

the backwards reach of the lever is 150mm (6”). Two holes

are required for the mounting of the pump, one to accept the

main body and one for the location pipe.

Once a suitable location has been found to mount the pump,

use the enclosed template, and mark the centres of the two

holes to be drilled. The one for the main body is to be Ø54mm

(2⅛”), and the one for the location pipe is to be Ø8mm (

”).

The pump is secured in position by tightening the locking ring

to the main body, from underneath the work top.

NOTE This picture is not to scale.

Hose Connections - Use 13mm (½”) flexible hose.

To operate the pump, swivel the handle backwards and forwards. Water will discharge on one stroke only.

The Flipper pump is designed to require minimal maintenance. Service kits AK0405 and AS0406 are available. With all Whale®

products, the complete system should be drained in preparation for winter.

This Whale® product is covered by a 5 year warranty. Please see the enclosed document for details of our statement of limited

warranty.

Whale® is a registered trademark of Munster Simms Engineering Ltd, Bangor, Northern Ireland. Please contact Whale® if further

details are required.

Engineering Limited, Bangor, Northern Ireland trading as Whale. Whale’s policy is one of continuous improvement and we reserve the right to change specifications

without prior notice. Illustrations are for guidance purposes only. Neither the accuracy nor completeness of the information contained in this or any product literature is

guaranteed by the Company and may be subject to change at its sole discretion.

1. To The User

2. To The Fitter

3. Application

5. Installation

4. Warnings

9. Patents and Trademarks

8. Warranty

7. Maintenance and Winterization

6. Operation

Munster Simms Engineering Ltd, 2 Enterprise Road, Bangor, Co. Down, N. Ireland, BT19 7TA

UK Tel: +44 (0)28 9127 6563 UK Email: info@whalepumps.com