Ⅱ. Flight environment requirements and basic flight procedures
1. Flight environment requirements
Do not fly under bad weather conditions, such as windy, snowy, rainy, lighting, and foggy
weather.
During the flight, make sure that the drone stays within your view and away from obstacles,
people, water, etc.
Do not fly with a large ground height difference (for example, from inside to outside of a floor).
Otherwise, the positioning function is abnormal and the flight safety will be affected.
Battery performance is affected by air density and ambient temperature. When the aircraft is
flying above 1000 meters, the performance of the battery and power system will be degraded
due to environmental factors which will affect flight performance. Please fly with caution.
The drones shall not be used in the event of fire, explosion, lightning strike, storm, flood,
earthquake, sandstorm and other disasters.
Do not fly near electromagnetic interference sources. Sources of electromagnetic interference
include WIFI hotspots, routers, Bluetooth devices, high-voltage wires, high-voltage transmission
stations, mobile phone base stations and battery broadcast towers. If the flight site is not
selected in accordance with the above provisions, the wireless transmission performance of the
drone may be interfered. If the interference source is too strong, the drone will not be able to
fly normally.
Please comply with local laws and regulations when using aircraft. This helps prevent possible
injury or loss.
2.Basic flight procedure
After the aircraft and remote control are turned on and Bluetooth is connected, place them on a
flat open ground with the user facing the tail of the aircraft.
To Next Page
Loading...