1
Before installing this product read all these instructions!
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Before making any connections, switch all the units in your system o
at the mains.
Set the volume control at minimum when you switch on your system or change sources, and turn the level up gradually.
DO NOT use your r at full volume.
Ensure that all loudspeakers in the system are correctly wired.
DO NOT subject your loudspeakers to excessive cold, heat, humidity or sunlight.
Loudspeakers should not be placed directly facing other
r share the same shelf or cabinet.
DO NOT place heavy objects on top of loudspeakers.
Some manufacturers forbid the placing of objects on top of their TV sets. Check your TV handbook before installing the speaker directly on
your TV set. Consult your TV dealer if you are in any doubt.
DO NOT connect speaker terminals to the mains supply.
DO NOT dismantle the loudspeaker. There are no user serviceable parts inside it and you will void the warranty by doing so.
Refer all servicing to
service personnel. Servicing is required when the apparatus has been damaged in any way, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Caution: Changes or
ations not expressly approved by the manufacturer could void the user's authority to operate this device.
Unpacking Your Loudspeaker
EVO4 loudspeakers come in di erent shapes and sizes. If you are unpacking a r stander, please remember that these units are heavy.
We suggest that you have someone to assist you.
Lift the loudspeaker carefully out of the packing. DO NOT try and lift the loudspeaker using the protective bag.
Unpack the accessories carefully.
If there is any sign of damage or if the contents are incomplete, report this to your dealer as soon as possible.
Retain the packing for future safe transport of the product. If you dispose of the packing, do so with respect to any recycling provisions in your
area.
ATTACHING THE SPIKES
CAUTION: SPIKES ARE SHARP.
Make sure that there are no wires or hidden obstacles that could be damaged by the spikes
in the immediate operational area of the speakers.
NEVER drag a loudspeaker on its spikes. always lift it. lf the item is heavy get assistance.
A mounting hole is located at each corner of the plinth. Thread a spike through each hole.
Tighten the collar
nger tight so that the spike is secure but not locked inplace.
After all the spikes are attached, invert the loudspeaker and place it carefully on the
oor.
Important Safety Information
This symbol indicates that there are important operating and maintenance instructions in the literature
accompanying this unit.
Spike Seats
A set of spike seats is provide to provided to protect sensitive
oors
from possible damage. The loudspeaker should be mounted on the wide
spikes and the spike seats should be placed under each spike as shown.
Level the loudspeakers with the spiker seats in place.
C
M
Y
CM
MY
CY
CMY
K
EVO4 Usermanual 91105.pdf 2 2019/11/8 14:18:22
To Next Page
Loading...
Need help?
General
