WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS
MASTER SECTION DESCRIPTION PM500 AND PM600:
DIGITAL DELAY SECTION:
The built in digital delay will process the sig-
nal from the input channels and feed to the
master output. The effects of digital delay
are controlled by:
TIME: This adjusts the internal time of the
delays. Turn to the right to increase the
interval time between two delays, turn to the
left to decrease.
REPEAT: This increases the repeat rate of
the delays by turning the knob to the right.
VOLUME: This knob adjusts the mix level of
the effect.
PM600
PM500
MASTER CONTROL PM500:
The Master Control adjusts
the final level of the Main
bus signal which is output to
the speakers.
MASTER CONTROL PM600:
The Master Control on the
PM600 also offers a three band
(MID, LOW and HIGH) EQ
section for tonal adjustment of
the final mix.
PM Series Instruction Manual Page 6
To Next Page
Loading...
